Ever had this happen to you? You go to the bathroom and as soon as you’re done and stand up, the toilet seat falls down. It’s quite a nuisance when the toilet seat won’t stay up to allow you to finish your toilet business.
Luckily, this problem is not unique and there are several ways you can fix it.
In this article, we shall provide a few tips to help you adjust the toilet seat and ensure it stays up. But first, let’s see why the toilet seat keeps falling down so that you can identify the cause on your end and fix it accordingly.
- Reasons why your toilet seat won’t stay up
- How to fix and keep the toilet seat from falling down
- Other ways to keep the toilet seat up
Reasons why your toilet seat won’t stay up
Seat pushed too far back on the bowl
One of the most common causes of the toilet seat failing to stay up is when it is pushed too far back on the bowl.
This causes the front of the toilet seat to be raised, which in turn makes it unable to stay up while someone sits down or stands up from sitting down on it.
There are some ways you can fix this issue as we shall discuss below.
The angle of the toilet seat
The angle of the toilet seat is really important in ensuring it stays in place. If it wrongly installed, then you have to use your hand to keep the seat propped open. This is pretty disgusting.
No one wants to keep touching the toilet seat every time they use the bathroom. The best solution to this is by reinstalling the seat the right way.
Loose or broken toilet hinges
If your toilet seat won’t stay up, it’s likely due to some loose or broken hinges.
This can be fixed easily by tightening the nuts on either side of the hinge with a wrench and then checking that they’re tight enough before you put the seat back down.
This should help make sure that everything stays in place so you can enjoy using your bathroom without having to worry about things falling off!
See also: How to unblock tissue paper clog
How to fix and keep the toilet seat from falling down
1. Reinstall the toilet seat
You will need to reinstall the seat if it was placed too far back or at the wrong angle during the initial installation.
Simply remove the seat and install it again taking into account the angle at which it leans against the water tank. It should be at least more than 90 degrees.
You will achieve this by ensuring the seat is not placed too far back on the toilet bowl.
2. Fix the hinges
If loose or broken hinges are the cause of your toilet seat not staying up, follow the steps below to solve this frustrating issue.
The first thing you’ll want to do is to make sure the hinges are tight and there aren’t any screws or bolts missing from either side of it.
Next step? Try tightening them by turning on each hinge in opposite directions using a screwdriver until they’re as tight as possible without breaking anything.
See also: Best toilet seats that don’t move
2. Replace old-style hardware with newer parts
You may also need to replace your old-style hardware with newer parts, which will make them less likely to break down and stop working properly.
3. Clean around the base of the toilet seat
Give it a good cleaning by wiping away any corrosion buildup, mildew, mold growth, and dust bunnies to ensure that it has a clean surface for contact.
Other ways to keep the toilet seat up
If none of the above ways work for you, here are some temporary alternatives you can try before seeking professional help.
1. Place a rubber band or hair tie over one end of the hinge so that it catches and holds in place when you close the lid.
2. If your toilet seat still won’t stay up, try adding some weight at either side (such as an old phone book) until you find something heavy enough to do the trick.
See also: Pros and cons of elongated toilets
If you’ve noticed that your toilet seat won’t stay up, there are a few things to check before buying a new one or calling in an expensive plumber.
We have provided a few tips that will help solve most of these pesky problems with ease. For instance, make sure it’s not just loose bolts or screws–tighten them and see if that does the trick.
Also, try tightening the hinges on either side of your toilet lid or replace the old hardware with newer parts.
Sometimes all you need to do give the seat a good cleaning to get rid of any corrosion buildup, mildew, mold growth that might be making it hard for the seat to stay in place.